首页

> 论文期刊知识库

首页 论文期刊知识库 问题

复合材料英语文献及翻译

发布时间:

复合材料英语文献及翻译

Wooster等报告了微米级石英/氰酸酯复合材料,在高填料量时机械性有所改善,热膨胀系数有所下降。Wippl等研究了用高填料量石英、氮化硅、和氧化铝作为增强材料的耐高温热固性塑料(双马来酰亚胺,聚酰亚胺,氰酸酯和),体积分数达80%时CTE可降低至 15 ppm/℃。

reduced CTE for high loadings:为了较高的承载力降低(减小)热膨胀系数CTE:热膨胀系数(Coefficient of Thermal Expansion);high loading:高承载力(高载荷)

Composite Materials (Composite materials), is based on a matrix material (Matrix), a material for the reinforcement (reinforcement) material Performance on a variety of materials in each other, creating synergies, so that the integrated performance of composite materials than the original composition of material to meet a variety of different Matrix material is divided into two major categories of metal and non- Commonly used in metal matrix aluminum, magnesium, copper, titanium and its Mainly non-metallic matrix of synthetic resin, rubber, ceramics, graphite, carbon and so Main reinforcement glass fiber, carbon fiber, boron fiber, aramid fiber, silicon carbide fibers, asbestos fibers, whiskers, wires and other fine-grained and The use of composite materials can be traced back to ancient From ancient times to enhance the use of straw and clay for centuries has been the use of reinforced concrete formed by the two types of composite The 20th century, 40's, due to the needs of the aviation industry, the development of glass fiber reinforced plastic (commonly known as glass fiber reinforced plastic), a composite material from the After the 50's, have developed a carbon fiber, graphite fibers and boron fibers high strength and high modulus 70's a aramid fiber and silicon carbide These high-strength, high modulus fibers with synthetic resin, carbon, graphite, ceramic, rubber and other non-metallic substrate or aluminum, magnesium, titanium and other metal matrix composites, which constitute the composite material [Edit this paragraph] Classification Is a mixture of composite Composite materials into their component metals and metal composites, non-metallic composite materials and metals, non-metallic and non-metallic composite According to their structural characteristics are divided into: ① fiber composite Body will be placed in a variety of fiber-reinforced matrix--《复合材料学报》2004年05期

Christensen, CM Innovation and The GeneralManager [M]McGraw-Hill CompaniesInc,1999

复合材料杂志英语翻译

非专业人员,尽力翻译!伍斯特通过研究氨酸酯复合材料和以千分尺计的溶解型硅土材料来表明提高材料的机械性能和减少热胀系数的负载率的方法!大体意思应该是通过某某材料的性状分析来表明提高机械性能和减少热胀系数负载率的方法或者效果吧!仅供参考!

reduced CTE for high loadings:为了较高的承载力降低(减小)热膨胀系数CTE:热膨胀系数(Coefficient of Thermal Expansion);high loading:高承载力(高载荷)

你可以到百度里下一个凡者词典,里面都是关于这方面的英语词汇

composite 本身就有复合材料的意思,名词词性,也有形容词复合的这个意思,你给的第一个和第三个可以,意思相同,但一般一说,只用composite 即可,也比较正规。

康复英文文献及翻译

你好!恢复期,康复期 的英文如下。recovery period, rehabilitation period。

Irecoverednow:我现在康复了recovered[ri'kʌvəd]基本翻译恢复(recover的过去分词);重新获得重新找到的网络释义recovered:已修复|复原|治愈

rehabilitation training 英[ˌri:həˌbɪlɪˈteɪʃən ˈtreiniŋ] 美[ˌrihəˌbɪləˈteʃən ˈtrenɪŋ] [词典] [医] 康复训练; [例句]Objective: To investigate the effect of early rehabilitation training for the functional recovery of acute cerebral infarction 目的:探讨早期康复训练对急性脑梗塞患者功能恢复的影响。

be recovered to health; to come through; to storation from sickness

复合材料英文文献

材料大全A到Z (金属、陶瓷、高分子、复合材料) (免费) 资源简介 材料模拟计算算法库MAP 资源简介 A: Composites/Plastics 资源简介 Kirk-Othmer Encyclopedia of Chemical Technology Online(Kirk-Othmer化工技术百科全书) (部分免费) 资源简介 Materials Research to Meet 21st Century Defense Needs (材料与国防) 资源简介 PoLyInfo (高分子材料设计所需的各种数据) (免费) 资源简介 Super-tough carbon-nanotube fibres (碳纳米管纤维) -taf/DynaPaf?file=/nature/ 资源简介 美国加州理工学院:Robert H Grubbs教授的研究小组 资源简介 涂料和油漆工业排名榜(主要为北美地区、前50位) 资源简介 英国的材料化学研究世界领先(2002-11-22) _mat_pdf 资源简介 Bell Labs (贝尔实验室, 纳米技术/分子自组装/导电高分子) -/research/html 资源简介 CAMPUS (塑料产品数据库, 免费) 资源简介 工程塑料国家重点实验室, 中国科学院化学研究所 资源简介 2004年国际纳米复合材料会议 (2004-09-01) -/conferences/html

你可以上GOOGLE学术上搜一搜看看目录,有很多,中文和英文的都很多,然后再可以上中国期刊网或万方上搜一些中文的资料,到sciencedirect上搜一些英文文献

希望采纳!本人能力有限!只能帮到这图1显示金刚石粒子分散的铜基体。自从金刚石粒子比较容易在机械抛光脱下衣服,小坑里留下了。表面上的样品。当样品进行了分析通过电子探针对碳、粒子显示高碳的山峰,如图2号。图3的展品分析结果为提取出来copper-diamond产品的复合利用x射线衍射(XRD)分析。结果表明,三见dis -分数峰存在,表现为一,B和C,分别。距离的interplanar相应于这三套对钻石峰标准的比较表1。interplanar测量值的距离在标准的吻合很好,恶魔-起动,提取的产品应该是碳在钻石的状态。图4(a)给出了透射电镜显微图显示分布金刚石粒子形貌和(显示为A,B,copper-diamond和C)复合材料。 校准interplanar衍射环的距离图4中了(b)所给的表2。相比,表1,它也是恶魔-strated interplanar距离的校准的衍射环的符合标准的钻石。因此,人们相信石墨化的钻石在粒子1150-1220几乎不发生后的烧结Kcopper-diamond复合材料。尽管钻石是亚稳态allotropic modifica -实践,石墨化碳的金刚石粒子在copper-diamond复合,没有发生,或者程度石墨化太小,被发现。据说起始温度的graphi -tization会伴随着纯度的钻石粉末等。某些金属等杂质元素减少金刚石graphitiza起始温度-信息。金刚石是静态合成捏造出来的方法、铁、镍催化剂和经常被用于目前在钻饰作为杂质,降低开始蛋彩画颜料

化学英语文献及翻译

1。溶胶凝胶(SG)的方法L05Ni1/3Co1/3Mn1/3O2阴极材料的方法合成了柠檬酸溶胶凝胶[下列方式31]研究。李(醋酸)•2H2O的,锰(醋酸)2•4H2O的化学计量的数额,镍(醋酸)2•4H2O的,和Co(醋酸)2•4H2Owere溶解于蒸馏水。柠檬酸作为螯合剂。溶液的pH值调整为0氢氧化铵。解决的办法是在70-80◦C的加热,直到得到一个透明溶胶。由此产生的干凝胶前驱体在120◦C的空气中4小时和8小时后与分解为450◦C以除去水中的有机物含量。被分解的粉末球磨(斯佩克斯阿8000混合机/米尔)为2小时不锈钢球,在850◦C的空气中烧结12小时地面加热和冷却的粉率分别为4◦◦C和最小煤粉浓度2 - 1,分别。2。共沉淀(CP)方法L05Ni1/3Co1/3Mn1/3O2阴极材料采用共沉淀法从镍钴氢氧化物前驱体法合成Mnmixed [17,24]。易制毒化学(Ni1/3Co1/3Mn1/3)(OH)2的制备化学计量比溶解的镍量(醋酸)2•4H2O的,钴(醋酸)2•4H2O的和Mn(CH3COO)2•4H2O的蒸馏水中(阳离子比镍:公司:锰= 1:1:1)和金属醋酸盐的总浓度为2mol L - 1的。在水溶液中,加入氢氧化锂(1米)/氨水(3M公司)随着继续搅拌沉淀。解决的办法是保持在50◦C和24小时的pH值控制在10-11。绿色褐色混合氢氧化物沉淀。经过滤,洗涤,干燥的氢氧化precipitatewas C的24小时,在120◦清除吸附的水。然后,得到的前驱体与LiOH的需要混合使用量球磨机(斯佩克斯阿8000混合机/米尔)和粉末压成颗粒。最初的颗粒加热到400◦C的6小时,然后在空气中磨光。微丸被翻拍,随后在900◦在空气中12 h的amuffle C烧结炉。加热速度最小煤粉浓度固定为4◦- 1和降温的速度是固定最小煤粉浓度为2◦- 1

求翻译一篇英文化学文献Quantifying the Cluster of Differentiation 4 Receptor Density on Human T Lymphocytes Using Multiple Reaction Monitoring Mass Spectrometry 多反应监测质量光谱法应用于人类T淋巴细胞量化分化抗原簇4受体密度 ABSTRACT: Cluster of differentiation 4 (CD4) is an important glycoprotein containing four extracellular domains, a transmembrane portion and a short intracellular It locates on the surface of various types of immune cells and performs a critical role in multiple cellular functions such as signal amplification and activation of T It is well-known as a clinical cell surface protein marker for study of HIV progression and for defining the T helper cell population in immunological Moreover, CD4 protein has been used as a biological calibrator for quantification of other surface and intracellular However, flow cytometry, the conventional method of quantification of the CD4 density on the T cell surface depends on antibodies and has suffered from variables such as antibody clones, the fluorophore and conjugation chemistries, the fixation conditions, and the flow cytometric quantification methods In this study, we report the development of a highly reproducible nano liquid chromatography−multiple reaction monitoring mass spectrometry-based quantitative method to quantify the CD4 receptor density in units of copy number per cell on human CD4+ T The method utilizes stable isotope-labeled full-length standard CD4 as an internal standard to measure endogenous CD4 directly, without the use of The development of the mass spectrometry-based approach of CD4 protein quantification is important as a complementary strategy to validate the analysis from the cytometry-based conventional It also provides new support for quantitative understanding and advanced characterization of CD4 on CD4+ T 摘要:集群分化4(CD4)是一种重要的糖蛋白,它包含四个胞外区域,横跨膜的部分和短的细胞内尾巴。它位于各种类型免疫细胞的表面,在多种细胞功能中扮演重要角色,像细胞信号放大和激活的T细胞。众所周知的是作为研究艾滋病病程的临床细胞表面蛋白标记和在免疫学应用程序中定义辅助T细胞数量。除此之外,CD4细胞蛋白质也已被用作其他表面和胞内蛋白量化的生物校准器。但是,流式细胞,传统量化CD4 T细胞表面密度的方法取决于抗体和并且会受到像抗体克隆、荧光团和结合化学、固定条件以及以前流式细胞定量方法等变量带来的改变。在这项研究中,我们报道一种人类CD4 + T细胞中量化CD4受体密度在每个细胞的拷贝数的高度可再生的纳米液相色谱 - 多反应监测质谱为基础的定量方法的发展。该方法利用稳定同位素标记的全长标准CD4作为内部标准来直接衡量内源性CD4,而不需要使用抗体。 以CD4质谱为基础的蛋白定量方法的发展,作为一个重要的补充战略来验证分析以流式细胞仪为基础的传统方法。它还提供了定量的理解和CD4在CD4 + T细胞上高级鉴定的新支持。 Cluster of differentiation 4 (CD4) is a glycoprotein that locates on the surface of immune cells such as T helper cells, monocytes, macrophages, and dendritic As a coreceptor, CD4 amplifies the signal generated by the T cell receptor, which is essential for activation of many molecules involved in the signaling cascade of an activated T In human T lymphocytes, CD4 receptor protein is encoded by the CD4 gene1and has four distinct extracellular domains (D1 to D4), a transmembrane portion, and a short intracellular 2The use of antihuman CD4 monoclonal antibodies generated against the four extracellular domains has been widely used to define T helper cells in Although the number of CD4+ T cells decreases in the progression of HIV-1 viral infection deriving from the gp120 viral protein binding to the CD4 receptor, Poncelet et reported that the surface CD4 density still remained constant on T helper cells of HIV-1 infected 3Since then, multiyear research has supported the theory that CD4 expression/density can be used as a biological calibrator for quantification of other surface and intracellular 4 分化4 ( CD4)的集群是一种糖蛋白,位于免疫细胞如T辅助细胞,单核细胞,巨噬细胞和树突状细胞的表面。作为一个辅助受体,CD4放大由T细胞受体产生的信号,它对很多分子的活化作用很重要包括信号级联激活T细胞。人类T淋巴细胞, CD4的受体蛋白质是由编码CD4 基因并且有四个不同的胞外结构域(D1到D4) ,跨膜部分和短的胞内尾巴。利用抗人CD4单克隆抗体在4各细胞外结构域的繁殖,已被广泛地被用于在免疫表型上定义辅助性T细胞。尽管CD4 + T细胞的数目在HIV -1病毒感染中减少,HIV -1病毒感染来源于病毒的gp120蛋白结合到CD4受体,蓬斯莱等。报告说,表面CD4的密度在艾滋病毒感染者的T辅助细胞上仍保持不变。从此以后,多年的研究支持了CD4表达/密度可用作生物校准器用于其它表面和细胞内蛋白质量化的这一理论。 Quantitative multicolor flow cytometry incorporating anti- bodies and a fluorescence detection method has played a critical role in clinical diagnostics and Though the ultimate objective of quantitative flow cytometry is to measure the number of antigens or ligand binding sites associated with a cell, the task is carried out by measuring the number of antibodies bound per cell (ABC) It is critically important to produce biological cell reference materials that bear well-characterized protein markers such as CD4 for the trans-formation of a calibrated linear fluorescence intensity scale of a flow cytometer channel to a biologically meaningful ABC 7The quality of the cytometric measurements is affected by variables such as antibody clones, the fluorophore and conjugation chemistries, the fixation conditions, and the flow cytometric quantification methods 4,8−11Hence, in addition to characterizing candidate reference cell preparations that use antibody-based cytometric methods,12it is necessary to develop a complementary approach to validate the absolute quantification of reference marker proteins such as CD4 without the use of 定量多色流式细胞结合体和荧光检测方法在临床诊断和免疫治疗中起到了至关重要的作用。虽然定量流式细胞仪最终目标是测量抗原或与细胞结合配体结合位点的数目,该任务的完成是通过测量每个细胞( ABC)抗体结合的数目。这对于

相关百科

热门百科

首页
发表服务