发布时间：
应该对你有帮助哦 1，“计算机应用与软件”中国芯，版面费1800元 2，“GT”没有版面费，但也付出对他们来说，很不错的 > 3，“材料保护”无版面费，以及特许权使用费 4，“施工技术”无版面费 5，成都的“电子信息对抗技术”无版面费，无审稿费 BR /> 6，成都的“电子战”，无版面费，不读书的费用常见的电脑杂志投稿 1。 “软件学报”（月刊）EI，ISTIC包括主办单位：中国计算机学会，软件研究所地址：北京市海淀区中关村盒“软件学报的8718编委会“邮编100080 邮发代号:82-367 邮箱： 的 2。 “计算机学报”（月刊）EI，ISTIC包括主办单位：中国科学院计算技术研究所，中国Academy of科学计算机学会地址：PO Box 2704计算技术，中国的研究院北京理工大学“计算机学报”编辑部代码100080 邮发代号:2-833 邮箱： CJC / html“目标=”_blank“> 3。计算机研究与发展（月刊）ISTIC包括主办单位：中国科学院计算技术研究所中国计算机学会地址：PO Box 2704计算技术，中国研究院“研究与发展”编辑部北京理工大学委员会邮编100080 邮发代号:2-654 邮箱： 包含 4。计算机工程（半月刊）ISTIC包括主办单位：中国东部计算技术研究所，上海计算机学会地址：418号桂林路，上海漕河泾“计算机工程”编辑部200233 >邮发代号:4-310 邮箱： 的http： / / 5。 “AAS”（双月刊）EI，ISTIC包括主办单位：中国自动化学会自动化地址科学研究所中国科协：北京中关村中国科学院自动化“AAS”编辑部科学研究所100080 邮发代号:2-180 邮箱： 的 zdhxb“目标=”_blank“> 6。 “模式识别与人工智能”（季刊）ISTIC包括主办单位：自动化国家工程研究中心为智能计算地址中国科协：合肥智能机械研究所，中国中国科学院合肥1130信箱“模式识别与人工智能”编辑部代码230031 邮发代号:26-69 邮箱： 7。 “小型微型计算机系统”（月刊）ISTIC包括主办单位：中国科学院计算技术研究所和平区，沉阳市，100号，中国科学院，沉阳：计算技术地址中科院沉阳研究所“小型微型计算机系统”编辑部邮编110004 邮发代号:8-108 邮箱： 的 的 8”计算机科学“（月刊）ISTIC包括主办单位：国家科技信息中心西南地址：胜利路132号，渝中区杂志“计算机科学”的社会邮编400013 邮发代码:78-68 邮箱： 。BR /> 9“计算机应用与软件”（月刊）主办单位：计算技术计算机软件上海上海研究所科技发展中心地址：上海愚园路546“计算机应用与软件“编辑部邮政编码：200040 邮发代号:4-379 10”数值计算与计算机应用“（季刊）ISTIC包括主办单位：计算数学研究所和科学工程计算地址：Box 2719，北京“数值计算与计算机应用”编辑部邮编：100080 邮发代号:2-413 邮箱：SZJS 的 HTTP :/ / WWW。的 /定期 11。“计算机工程与应用”（旬刊）ISTIC包括主办单位：中国北方学院计算技术地址：北京211北四环路，北京619箱26分箱“计算机工程与应用”杂志社编号100083 邮发代号：82 -605 投稿信箱： 的http 。:/ / WWW 的 /期刊/ 12“计算机应用研究”（月刊）ISTIC包括主办单位：应用研究中心，四川计算机地址：第11条第4款，人民南路，成都，附着在首届“计算机应用研究”杂志社邮编：610041 邮发代号:62-68 邮箱：SRCCA@SICHUANNETCN 。 13“计算机工程与科学”（双月刊）ISTIC包括主办单位：学校的国防科技地址计算机科学学院：湖南长沙仁街47瓦特池“计算机工程与科学“编辑部邮编：410073 邮发代号:42-153 邮箱： 14”中国信息化“（双月刊）ISTIC包括主办单位：中国软件信息处理学会研究所地址：北京市8718信箱“杂志中国信息化”编辑部代码100080 邮箱： 15“计算机应用”（月刊）ISTIC包括主办单位：中国科学院，成都计算机应用研究所四川省计算机学会地址：成都市，成都市人民南路二段九城237信箱“计算机应用”编辑部代码610041 邮发代号:62-110 邮箱： 的 的 16”计算机辅助设计与图形学学报“（月刊）ISTIC包括主办单位：中国计算机学会 >地址：PO Box 2704计算技术研究所，中国科学院中国北京邮编100080 邮发代号：82 -456 邮箱： 的/“目标=”_blank“> 。 17。”武汉理工大学学报“（自然科学版）（双月刊） EI（自然科学版英文）; ISTIC 主办单位：武汉大学地址：武汉市武昌珞珈山邮编430072 发码:38-8 邮箱：WUJ @ 的 18。 “计算机科学与技术”（英文）（双月刊）SCIE，EI收录主办单位：中国科学院计算技术研究所地址：PO Box 2704北京邮编100080 邮发代号：2 -578 电子邮件： ，CN 19“计算机工程与设计”（月刊）主办单位：中国航天科工集团二院706 地址：Box 406 142北京分箱“计算机工程与设计“编辑部邮编：100854 邮发代号:82-425 邮箱：，CN 20”微电子学与计算机“（月刊）主办单位：中国航天科技集团公司，西安微电子技术研究所地址：西安市81号信箱“微电子学与计算机”编辑部邮编：710054 邮发代号:52-16 电脑杂志（可在网上提交）：电脑及周边设备（电脑及周边）的E-mail：确定HOPE 计算机模拟（计算机模拟）的E-mail：bta。 CAE（计算机辅助工程）的E-mail： 计算机辅助设计与图形学（计算机辅助设计与计算机图形学）的E-mail ： 计算机工程与科学（计算机工程与科学）的E-mail： 计算机集成制造系统（计算机集成制造系统） BR />电子邮件： 计算机科学（计算机科学）的E-mail： 计算机科学与技术（英文版）（计算机科学与技术）邮箱： 期刊（中国计算机学报电子邮件： 计算机研究与开发（计算机研究与发展）邮箱： 计算机应用（计算机Appliocations）的E-mail：com-app- >计算机与现代化（计算机与现代化）的E-mail：1，每月：计算机应用研究（计算机应用研究）的E-mail： 2 ，半月刊：计算机工程（计算机工程师）的E-mail： 3，旬刊：计算机工程与应用（计算机工程与应用）的E-mail：，请 的 /计算机应用（计算机Appliocations）的 的 /主要内容：围绕”应用程序“主要涉及到计算机网络集成和通信，软件应用，信息系统，数据库，多媒体，图形/图像处理。 ，计算机控制，先进制造技术，CAD / CAM / CIMS，人工智能，专家系统和新的计算机硬件和软件系统开发经验，市场信息和发展趋势空心柱：应用技术专题，研究与设计，软件技术，研究生论坛，开发与应用，典型应用技术在线投稿邮箱：汇款：开户银行：通过邮件信箱成都237“计算机应用”编辑部银行汇款填写汇款单：账户的银行分行磨分公司：计算机应用编辑部帐号：511609017018001969114注：本文作者通过电子方式提交，在三到四个工作日，如果能收到，已收到稿件我的答复发表的手稿！号，否则未收到稿件请不要手稿为了缩短周期稿件审稿，请仔细阅读使用说明PS：看权利要求1至3的手稿，以及格式要求。
可能还是在审核的吧
指的是外审专家已经把审稿意见返回编辑部了，只需耐心等待编辑部下一步的通知了。外审专家指的是评阅导师和论文作者互不了解来审查论文的职业。这样有助于论文能够更公平地得到审理。外审一般要有三个外审专家对论文进行评判。通常外审专家由高校教师教授组成，外审专家权利很大，如果一个外审专家拒审，那么论文就很难发表。
可以。工程力学学报第一个外审专家审完了是可以看修改意见的，根据意见修改学报会更好。外审是期刊审稿的一个环节，是一个流程，而专家则是执行外审的行为主体，所以二者不存在难以辨别的情况，外审和专家可以说是相辅相成的，二者共同构成了期刊的外审。
恭喜了说明你的论文还可以啊 论文发表的大概是这样的：你先投稿，他们内部人士审阅了以后，留下还可以的，让其它不属于本部门的学科领域的牛人，审查。等他们看完了，再给回复，说你的论文可以发表或者不可以发表，这个过程就是外审！！外审一般会比较久，我的论文当时是，三个月，很痛苦！
论文检测系统软件，有免费试用哦， 修改秘籍，非淘宝
指的是外审专家已经把审稿意见返回编辑部了，只需耐心等待编辑部下一步的通知了。外审专家指的是评阅导师和论文作者互不了解来审查论文的职业。这样有助于论文能够更公平地得到审理。外审一般要有三个外审专家对论文进行评判。通常外审专家由高校教师教授组成，外审专家权利很大，如果一个外审专家拒审，那么论文就很难发表。
王应宽Wang Yingkuan2011-07-23Beijing, China因为同时在运作3本国际英文刊（IJABE, IAEJ, CIGR Journal），论文同行评审的专家来自世界各地。每次收到的评审意见千差万别，而且不同国家或地区的专家的评审意见呈现一定的规律性，随即不由得做些比较。比较得出的基本结论是：欧美国家专家的评审意见详尽具有更大参考价值，台湾地区的同行评审专家次之，大陆专家的评审意见最为简省。文后附上几篇评审意见（所列大陆专家评审意见还是相对较好的），看看便知，一目了然。我曾与编辑同行讨论关于国内专家审稿的问题。共同的见解是，一线一流的专家基本不审稿。若应邀审稿，要么直接拒审，要么敷衍几句了事；比较认真的专家大都让其所指导的研究生代为评审论文。不论让谁审，最后的评审意见与国外专家的评审相比总不令人满意，存在较大的差距。国外专家评审论文大都是义务劳动，没有任何报酬。但专家们认为自己作为科研人员是科学共同体中的一分子，有义务担任同行专家为他人研究成果的学术质量把关。自己为别人的论文评审把关付出了智慧和劳动，别人也会为自己的研究和论文评审把关，也会付出相应的劳动。专家之间相互协作，相互帮助，虽然没有评审报酬，但大家都觉得平等。而且，国外的专家大都言行一致，故能认真地做好每一篇文章的评审工作。有的评审意见详尽的令人赞叹、钦佩和感动。因此，大家看到他们的评审意见都非常详尽而具有参考价值。而国内的专家评审论文为何大都仓促应付，三言两语，或言之无物，或毫无参考价值？主要原因是一线一流的专家都太“忙”，以至忙得都没时间做学术了。据我从事学术期刊工作十多年的经历，不论评审中文文章还是英文文章，国内专家评审意见普遍简单，评审的质量不高，不但看不出有改观的迹象，还有进一步恶化的趋势。文章中存在的很多的问题，专家审后没有看出来或没有指出来。如果直接发表，错误或疏漏太多影响论文的质量和期刊的声誉。在外审专家靠不住时，就要依靠内审做些完善和提高。如果外审专家把不好关，编辑部又无能力通过内审把关，发表出来的论文的质量也就可想而知了。是否国内专家不擅长评审论文呢？非也。据了解，许多国内专家被国外知名期刊邀请审稿时，他们非常积极认真地评审论文，并在规定时间返回颇有水准的评审意见。据说他们也能做得与欧美国际同行专家一样好。可见，国内专家评不好国内期刊论文不是水平问题，而是态度问题，“时间”问题，或者有其他方面的原因。同行评审是学术期刊论文质量把关的重要途径。如果大家都不在乎，把严肃认真的“盲审”变成“瞎审”，学术危矣！国内期刊请国内专家评审论文大都支付审稿费的。当然，限于各期刊的经济困难，审稿费报酬普遍都不高。因此，同行专家大都不很在乎那点可怜的审稿费。如果评审不好文章会影响专家的声誉和公信度。国内特别是大陆的专家既不在乎钱，也不在乎自己的声誉，不知道他们究竟在乎啥？中国是雷锋诞生的国度，按理说，当志愿者做公益应该很有基础。但在学术圈，就拿国内外同行专家无私奉献评审论文作比较，中国的同行专家做的还很不够，需要好好向国际同行学习。附：CIGR Journal栏目主编加拿大专家对一篇退稿文章的评审意见June 27, 2011Dear P H L L:Re: CIGR Manuscript 1911 EFFECTS OF TRACTOR INFLATION PRESSURE AND TRAFFIC ON SOIL PHYSICAL PROPERTIESAs CIGR section editor, I have conducted a preliminary review of the above The manuscript addresses a significant engineering problem in agricultural crop production, and as such, the subject matter is of interest to CIGRHowever, the manuscript is deficient in several scientific The decision is to decline the manuscript without peer My preliminary review is attached to the end of this Please note that the preliminary review is by no means a comprehensive The manuscript is released, and you are free to submit it for publication in another Thank you for considering CIGR for publication of your work and I wish you success in getting your work SincerelyPE, PD,CIGR Section III editor,Research Scientist, Agricultural Engineering,Agriculture and Agri-Food Canada,Section Editor ReviewTitle: EFFECTS OF TRACTOR INFLATION PRESSURE AND TRAFFIC ON SOIL PHYSICAL PROPERTIESCIGR # 1911Authors:H L L et June 27, 2011General:The manuscript addresses soil compaction by multiple passes with agricultural machinery which is a timely topic and of importance to sustainable agricultural There are numerous grammatical errors although the meaning is generally It is strongly recommended that the authors seek the assistance of someone well versed in English to help with the The manuscript is not acceptable in its present It needs a lot of The biggest problem with the manuscript is that key pieces of information are not given, and that the data analysis is not Some of the major deficiencies are listed below although this is by no means an exhaustive Soil It is well known that soil characteristics have a huge influence on soil The only description given is that the soil was a sandy Things like soil series, percent sand, silt and clay, soil organic matter all influence compaction and need to be Tractor specifications: Total tractor weight, tractor axle (or wheel) weights, are critical pieces of information required for compaction studies, but they are not Tire pressure was given, but no information was given on whether these pressures were the same for front and rear Often, tractor manufacturers recommend different pressures for front and rear tires, particularly on tractors with different sizes of front and rear Slip was measured, but there was no mention made of whether the tractor was free wheeling (no implement draft) or whether it was pulling a The drawbar load on a tractor has a huge effect on wheel slip, and must be It was mentioned that a 4WD tractor was used, and different tire sizes were given for front and rear tires which implies that it was a front wheel It needs to be specified whether or not the front wheel drive was Results: A randomized complete block statistical design with three replicates was However, the results are given in a series of tables with simple means with no statistical The results need to be subjected to appropriate statistical analysis, ANOVA or multiple regression analysis, and appropriate post hoc tests applied to determine which means are statistically different from each The experimental design employed lends itself to standard statistical analysis of the Graphs should be used when appropriate to help illustrate the data and the Table 1, 2 and 3 and Cone index has wrong Cone index is normally given in MPa or kPAlso, the values for cone index are much lower than normally Section 3It is not necessary to list all of the equipment used such as oven, air compressor, All you need to say is that samples were oven dried at 105�0�2 C for soil moisture Things like air compressor and pressure gauge are every day shop equipment, are understood to be necessary for any type of experiment where inflation pressures are However, things like the penetrometer, and shear vane meter should be These are specialized pieces of equipment and their performance can affect the Section Need to provide information on which soil cone penetrometer you Also, how many penetrometer measurements per plot per pass?3)In Figure 4, the text “USB Connection” was overlapped by the 4)In Figure 4, the line with the “Information Collection” is missing an 5)In Figure 7, the text “field identifying number” was covered by the 6)In Figure 8, some texts are placed out of the 7)Please use consistent fonts in figures throughout the Confidential Comments to Associate Editor/Division Editor/Editor-in-chiefI recommend the authors should use consistent fonts throughout the The paper cannot be accepted in its present 中国大陆专家1评审论文意见Section III: CommentsThis section is the most valuable part of the review for the author(s), who are extremely interested in how you formed your opinion of this Please provide specific comments that will help the author(s) understand your review, and possibly prepare a Use all the space you General Comments:This paper assess the O2 consumption rate and the CO2 evolution rate in tomato pomace treated with Pleurotus ostreatus without and with Mn to determine if peak colonization rate (for heightened delignification) was delayed by Generally speaking, the author’s work is useful and The author gives a brief introduction to the related work and compares his ideas to The theoretical analysis of this article is In all, this manuscript has good novelty and strong technical strength, I’m looking forward the results of further investigations on this Specific comments:In Table 1, notes are not enough in this In the Results and Discussion, results have been detailed explained, but some theoretical analysis of the experimental data are not Confidential Comments to Associate Editor/Division EditorI hope the paper will be published to guide more Reviewers’ information (Blind to Authors)中国大陆专家2评审论文意见(相对而言属于国内专家评审较为认真仔细的了)Section III: CommentsThis section is the most valuable part of the review for the author(s), who are extremely interested in how you formed your opinion of this Please provide specific comments that will help the author(s) understand your review, and possibly prepare a Use all the space you General Comments:Variable Spray will play an important role in saving resources, protecting environment, raising quality of agricultural The purpose of this paper is to evaluate PWM-based continuous variable spray in terms of spray distribution pattern, spray droplet size, and spray angle for flat-fan, hollow-cone and solid-cone The test design, results, analysis and conclusion are After re-review, this paper may be published, I Specific comments:(1)I have read a paper named “Variable rate Continuous Spray Equipment Based on PWM Technology and Its Spray Characteristics”, which was published in Transactions of the Chinese Society for Agricultural Machinery, 2008, 39 (6): 77-80 (in Chinese)”(see the attachment), I think that is a previous study work of the If that is correct, I suggest the author adding that paper in the references of this And then, the contents which have been described in the previous paper can be deleted from this (2)In the abstract “The sensitivities of the spray angles to flow-rate are 8254o/%、6681o/%、5761o/% respectively for flat-fan, the hollow-cone and the solid-cone nozzles” In English, without the symbol “、”(3)The numerical data in the conclusion are not the same as those in the abstract”Confidential Comments to Associate Editor/Division EditorReviewers’ information (Blind to Authors)中国大陆专家3评审论文意见Section III: CommentsThis section is the most valuable part of the review for the author(s), who are extremely interested in how you formed your opinion of this Please provide specific comments that will help the author(s) understand your review, and possibly prepare a Use all the space you General Comments:This paper is more important, but it still needs major revision requiring re-Specific comments:Revision suggestions of this paper: The study results and conclusions should be clarified in It should be described clearly about the data and size of NACA0015 airfoil which was selected in the numerical simulation in section It should be described clearly about the specific quantitative conditions of icing in section This paper is required re-review after Confidential Comments to Associate Editor/Division Editor
可能还是在审核的吧
一般初审很少书费，都是进入专家外审收费的，也就是100元左右，如果没有通过，是不退钱的。
我也交了100审稿费，最后还录用了，打钱之前，当时编辑和说好了，不管录不录用，到时候要给发票。
不交审稿费的。
这样的情况很正常。部分期刊聘请有审稿者，所以需要支付审稿费用。如果终审不过，那么，也不会退还费用的。